Strike FSA Picatinny Mount Single Fold Pistol Stabilizing Brace

THIS ITEM QUALIFIES FOR FREE SHIPPING

FEATURES

- Made by STRIKE INDUSTRIES
- This is a Preassembled folding pistol stabilizing brace
- Extremely positive and strong lock
- Quick deployment
- Mounts directly to 1913 Picatinny rails with M5 screw and locking plate
- QD Sling Point
- Folds single side anytime without any reconfiguring hinge or button
- Adds 9.09” (230.8mm) to overall weapon length in operating position
- Adds 0.8” (20.30mm) to overall weapon length in folded position
- SI custom high-strength polymer stabilizer ends Low


PACKAGE CONTENTS

- 1x Strike Folding Stabilizer
- 1x Torx tool [T27]
- 1x Warning Card


SPECIFICATIONS

- Length: 9.09"
- Width: 1.92"
- Height: 5.59"
- Weight: 10.75 oz
 

This is the new Strike Single Folder ( Stabilizer Edition ).

You may already be familiar with our Strike FSA Dual, a modular folding arm solution that can fold to the left and the right with interchangeable stock and stabilizer end pieces.

The new Single Folder utilizes the same arm and modular stock/stabilizer end pieces. What's new is that it has a strengthened hinge made out of steel, instead of aluminum, making it extremely rigid and robust. The fitment is also perfect with little to no play when extended and folded. This folder only folds to a single side but can do so at anytime without any reconfiguration or use of a button. When the hinge is installed to fold left, users will experience similar muscle memory if they've already used our Dual Folder - the action is the same to fold. Simply lift up on the arm and fold to the left. In its folded position, the arm can be firmly thrown back into the extended position for quick deployment with no risk of damage to the hinge thanks to its new beefed up design. The Stabilizer edition of our Single folder has only one QD point located at the 6 o'clock facing position for attaching your favorite sling.

The Strike Single Folding Adapter is compatible with any weapon platform that has a rear-facing 1913 Picatinny rail. To attach, simply tighten the hex screw in the hinge adapter onto a pic rail. Look no further for a compact, lightweight, and reliable single folder!

On its own, the Single folder is 11oz. With the additional of a STRIKE Cheek Riser it weighs 12.41oz ( cheek riser is Not included ). Whether it's for our SIG MPX, Ruger PC Charger, SMC Bravo Pistol Chassis, a pistol caliber carbine like the CZ Scorpion, or a PDW style AR-15 pistol the Strike Single Folder is perfect for them all. Get yours today!

NOTE: Lubrication of hinge needed for routine maintenance.

TORQUE: It may vary depending on if you are attaching this to an aluminum or polymer picatinny rail. For the picatinny mount screw on aluminum rails do not exceed 40 in/lbs (4.5Nm). For the picatinny mount screw on polymer rails do not exceed 35 in/lbs (4.0Nm)


Brand New With Manufacture Warranty
____________________________________

No shipping to California, Colorado, Connecticut, District of Columbia, Delaware, Guam, Hawaii, Illinois, Massachusetts, Maryland, New Jersey, New York, Puerto Rico, Rhode Island, Vermont, Washington state, Military APO/FPO or any other location where such items are prohibited or restricted

This item may not be exported outside the USA (  Orders from re-shipping companies will not be accepted )

Due to constantly changing laws pertaining to such items, the shipping restrictions for this product may be changed at any given time without notice

It is the responsibility of the buyer to research and obey all applicable local, state, and federal laws in regard to the possession, use, and sale of any products purchased from M1Surplus.com