NcSTAR SKS Gas Tube With Picatinny Rail and UTG Quick Detach Red Green Dot Quick Aiming Sight - MSKSV2 SCPDS3840WB
THIS ITEM
QUALIFIES FOR FREE SHIPPING
GAS
TUBE MOUNT FEATURES
- Made by NcSTAR
- Model: SKS Gas Tube with Picatinny
Rail Scope Mount Gen 2
- Version 2 with a Sleek new design
- Replaces the factory gas tube and
upper hanguard on the SKS rifle
- Fits
most SKS rifles including Chinese and Russian variants
- Does Not fit Albanian SKS rifles
- Does Not fit the Yugo M59/66A1 due to
the gas cut-off system
- Does Not include Gas Piston
- Note this will fit older YUGO M59 SKS
rifles "without" gas cut-off system
- Picatinny rail on top is designed to
allow shooters to mount optics with long eye relief for a scout rifle
setup
- Two set screws secure the mount to the
rear sight trunnion for a solid optics mounting platform
- Low profile Picatinny rail with a
sight channel down the middle to allow the use of the rifles iron sights
- Great for long eye relief scout scopes
or reflex dot sights
- Two Picatinny side rails included,
they can be mounted into any of the six ventillation holes and are also
removable
- The Gas Tube is manufactured just
slightly longer by a few thousandths, so that it can be hand fited to
the various manufacturers of the SKS rifles
- Some handfitting may be required for a
secure fit
- The Gas Tube is manufactured just
slightly longer by a few thousandths, so that it can be hand fited to
the various manufacturers of the SKS rifles
- Some handfitting may be required for a
secure fit
- Aluminum (Rail) and Steel Construction
(Gas Tube)
- Length: 9.8"
- Weight: 10.9 oz.
- US Patent: D732628
- This item is imported
UTG DOT SIGHT FEATURES
- Made by UTG
- Model: Tactical Aiming Sight 4.2"
Length Red/Green CQB Dot
- Color: Matte Black
- Material: Aluminum
- Length: 4"
- Weight: 7.1 oz
- Magnification: 1x
- Tube Diameter: 38mm
- Objective Diameter: 32.5mm
- Field of View @ 100 yards: 100' feet
- Eye Relief: Unlimited
- Exit Pupil: 26mm
- Click Value @100 yards: 1/2" MOA
- Parallax Setting: Infinity
- Batteries: 1 x CR1620 3V ( Included )
- Finger click adjustable windage and
elevation turrets
Windage/elevation turrets can be locked with included allen wrench to
prevent accidental change to scopes zero, Reticle pattern: Illuminated
Red/Green Dot, Side turret selects the color of the dos and adjusts the
brightness settings, Made to withstand heavy centerfire rifle/shotgun
recoil. This scope allows for fast target acquisition with both eyes
open, Includes battery, flip up lens covers, lens polishing cloth, low
profile quick detach mount, Co-Witness quick detach mount.
This sight features an height adjustable mounting system that fits
Mil-Std 1913 Picatinny type rails. The height can be adjusted by simply
unbolting and installing or removing the included riser section.
The Low profile mount setting is ideal for
situations such as a gas tube mount installation that can benefit from
the lowest possible scope position. With the riser
installed the sight will be positioned at correct AR15 Co-Witness
height so you can see your iron sights through the sight.
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
It is the responsibility of the
buyer to research and obey all
applicable local, state, and federal laws in regard to the possession,
use, and sale of any products purchased from M1Surplus.com
This product was added to our catalog on Tuesday 25 May, 2021.