This Item Qualifies for FREE SHIPPING
FEATURES
- Made by NcSTAR
- Manufacture Part# TGSETK
- The Essential Gunsmith Tool Kit includes some of the most important items that you must have for Gunsmith operations
- Useful for working on many different pistols, rifles and shotguns
- Includes the following items:
- Mallet with Nylon & Brass ends - 11" Length
- Screw Driver Handle with ¼" Hex Drive - 7.4” Length
- Needle Nose Plier - 4.5" Length
- Triangle Mill file - 7.7" Length
- Gunsmith Bench Block - 4" Diameter Nylon
- Jewelers’ Screw Drivers Set - 6 pcs: Phillips - #0, #1, Flat
- Steel Punch Set – 8 pcs: Roll Pin Drift Punch - 3/32", 1/8", 3/16", 1/4" , Drift Punch - 3/32", 1/8", 3/16", Center Punch - 4.8" Length
- Brass Punch Set - 5 pcs: Brass Drift Punch - 1/8", 5/32", 7/32", 1/4", 5/16"
- Polymer Punch Set - 2 pcs: Polymer Drift Punch - 7/32", 5/16"
- 30 Piece ¼" Screw Bit Set
- Flat Blade(mm): 3, 4, 5, 5.5, 6, 7
- Phillips: PH0, PH1, PH2, PH3, PZ0, PZ1, PZ2, PZ3
- Hex: H3, H4, H5, H6
- Torx: T10, T15, T20, T25, T27, T30, T40
- ¼" Hex Bit to ¼" Socket Adapter
- Square: S1, S2, S3
- Safety Glasses - Clear Lens
- Soft carry Case - Black (11.5" T x 15.5" W x 3.25" D)
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
It is the responsibility of the buyer to research and obey all
applicable local, state, and federal laws in regard to the possession,
use, and sale of any products purchased from M1Surplus.com
