AR Combo #9 - Flattop Trirail Rings + 4x30 Scope + UTG Laser


Includes the following items:

#1. TriRail Scope Rings - Matte Black Color, Material: Aluminum, Weight: 4.0 ounces per ring, Width: 2-3/8" , Height: 2-5/8" , Depth: 1" , Rail Width: 7/8 inches, These rings have a 30mm internal diameter and also include inserts that reduce the internal diameter to 1". These rings can be used with most scopes and red dots that have either a 1" or 30mm tube diameter. Thick aluminum design will handle heavy recoil and hard use. Sturdy hex nut provides a strong and positive retention when attached to your scope mount or rail system. 4 bolts on each ring cap provide strong and even and clamping pressure for your scope. Hi-Profile design will accept scopes with an objective diameter up to 62mm. Each ring has three integral Weaver style rails for attaching your tactical accessories. Includes 2 rings

#2. Compact 4x30 Rifle Scope - Material: Aluminum, Color: Matte Black, 6 power magnification with 32mm objective, Lens Coating : Blue, Tube Diameter: 1", Length: 7.68" , Weight: approx 7.77 ounces, Eye Relief: 3.15", Reticle: Black cross hair, Includes protective lens cover and lens polishing cloth.

#3. UTG Tactical Red Laser Set - Made by UTG, Material: Laser and mount made out of aluminum, Color: Matte black, Approx Dimensions: Height: 1-1/8" Length 2-1/4", Weaver style mount allows laser to fit most any Weaver/Picatinny rails and mounts, Includes two activation switches, The first is a push button permanent on/off switch, The second is a remote curly cord pressure switch that activates the laser with slight finger pressure and then deactivates laser when finger pressure is released. Curly Cord switch can be stretched out to fit in the most convenient location. Curly cord switch has double sided Velcro fastener with sticky tape for mounting purposes. Uses common watch type Batteries which are included.

Installation requires no permanent modification to your rifles. No need to use a riser with this setup as the height of the rings will clear the front iron sight on AR15, CX4, FNAR, SCAR, M4, SU16, SR556, SR22, S&W M&P and other similar rifles. Can be mounted to most any rifle or shotgun that has a Flattop or Weaver/Picatinny style mounting rail. We recommend the use of thread locking compound on all screws. Thread locking compound is not included. All items are Brand New w/ Full Manufacture Warranty


* This item cannot be shipped to Massachusetts, New York City or Puerto Rico *

Add to Cart:

  • Model: M1-SRHDTR+SC632B+SCPLS268
  • Manufactured by: M1Surplus

This product was added to our catalog on Friday 04 March, 2011.

Copyright © 2019 Powered by Zen Cart