NcStar .223 Cartridge Red Laser Bore Sighter / TLZ223

FEATURES

    - Made by NcSTAR
    - Manufacture Part# TLZ223
    - Model: Cartridge Laser Boresight For .223 Caliber
    - Material: Aluminum
    - Color: Brass
    - Length: 1.8"
    - Weight: 0.3 oz
    - Red Laser: 635-655nm, Max output <5mw, Class IIIa Laser
    - This laser bullet bore sighter is made for .223 but will also work with 5.56 rifles and pistols
    - Bore sight drops directly into the chamber and project a perfectly straight Laser Beam right down the rifles bore
    - The Laser Bore Sight is factory aligned and needs no calibration

This is by far the most convenient and accurate method for sighting in your rifle or pistol. Simply place the batteries into the Bore Sight housing then replace the end cap turning to the right until the end cap lightly seats which will activate the bore sighter laser. Place the Bore Sight into the rifle/pistol chamber and slowly close the bolt ( On some rifles/pistols it will not be necessary to have the bolt closed if the bore sight fits snug in the chamber). The red laser dot will project through the barrel. Then proceed to adjust the windage and elevation settings on your sight or scope to meet the red laser dot. After this process you will need to live fire only enough to fine tune the scope or sights to compensate for inconsistencies, such as bullet drop due to weight and other changes to point of impact caused by bullet/barrel imperfections.


CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Brand New With Manufacture Warranty
____________________________________

It is the responsibility of the buyer to research and obey all applicable local, state, and federal laws in regard to the possession, use, and sale of any products purchased from M1Surplus.com