M1A Combo #11 - UTG Tactical Q.D. Red Green Dot Scope + Mount

$99.99

Item #1: UTG Tactical Q.D. Red Green Dot Scope

FEATURES

  • Made by UTG
  • Color: Matte Black
  • Material: Aluminum
  • Length: 4"
  • Weight: 7.1 oz
  • Magnification: 1x
  • Tube Diameter: 38mm
  • Objective Diameter: 32.5mm
  • Field of View @ 100 yards: 100' feet
  • Eye Relief: Unlimited
  • Exit Pupil: 26mm
  • Click Value @100 yards: 1/2" MOA
  • Parallax Setting: Infinity
  • Batteries: 1 x CR1620 3V ( Included )
  • Finger click adjustable windage and elevation turrets

Windage/elevation turrets can be locked with included allen wrench to prevent accidental change to scopes zero, Reticle pattern: Illuminated Red/Green Dot, Side turret selects the color of the dos and adjusts the brightness settings, Made to withstand heavy centerfire rifle/shotgun recoil. This scope allows for fast target acquisition with both eyes open, Includes battery, flip up lens covers, lens polishing cloth, low profile quick detach mount, Co-Witness quick detach mount. Low profile mount will fit most any Weaver/Picatinny rail and is ideal for situation requiring the lowest possible scope position. Co-Witness mount will fit most any Weaver/Picatinny rail and is ideal for co-witnessing iron sights on AR15 type rifles. Both low profile and Co-Witness mount can be quickly attached/detached from your rail system in just a matter of seconds.


Item #2: M1A Scope Mount

FEATURES

  • Net Weight: 6.4 oz.
  • Material: Aluminum
  • Color: Anodized Matte Black
  • Imported
  • Fits Mil Spec Springfield M1A Rifles including Scout Squad
  • Does Not fit M14 rifles
  • Two point locking system provides a stable platform for your optics
  • Low profile design with see through channel, allows use of iron sights
  • Will not fit Socom II
  • Allows for mounting your optics in a low ergonomic position on your rifle
  • Tools requires for installation: Punch, Hammer or Brass Mallet, sharp flat file, thread locking compound ( these tools are Not included )
  • Note that installation of this mount will require fitting procedures as detailed below:
    • Installation requires removal the rear stripper clip guide on your rifle by drifting out a pin and then tapping out the guide
    • An included replacement part that anchors the rear of the mount will then be filed to fit in place of the stripper clip guide
    • The mount can then be attached to the rifle with the include mounting hardware
    • Medium strength thread locking compound is required on all the bolts and screws to prevent things from coming loose
  • Includes detailed written installation instructions

 

Brand New With Manufacture Warranty Against Defects
____________________________________


Add to Cart:

  • Model: LP/SCPDS3840W+MNT914V2
  • Manufactured by: M1Surplus


This product was added to our catalog on Friday 29 January, 2016.

Copyright © 2020 m1surplus.com. Powered by Zen Cart