M1A Combo #6 - Trinity 8-32x50 Hi-Power Rifle Scope + Mount



Item #1: Trinity Force 8-32x50 Hi-Power Rifle Scope


    - Made by Trinity Force
    - Manufacture Part# SR11L83250BAOE
    - Model: 8-32x50 Commander Series
    - Color: Black Matte coating
    - Material: One piece anodized aluminum main tube
    - Multi Coated Lenses
    - Eight to Thirty Two times Zoom Magnification Range
    - Quick Focus eyepiece
    - Adjustable Windage / Elevation settings via quick adjusting Tactical target turrets
    - Reticles illuminate in Three colors ( Red, Green, Blue )
    - Adjutable brightness to accomdoate varying light conditions

    - Includes Tall Height Aluminum Picatinny style rings, Flip-Open lens caps, sun shade and battery

    - Reticle: Mil-Dot Range Estimating Reticle Pattern
    - Magnification: 8x-32x Variable Power
    - Tube Diameter: 1"
    - Objective Diameter: 50mm
    - Eye Relief (in): 3.5
    - Field of View (ft) at 100 yards: 12.56-3.66, 19.36-4.18, 9.42-2.64    
    - Tube Size (mm): 25.4
    - Elevation Adjustment Range: ±25MOA
    - Windage Adjustment Range: ±25MOA
    - Parallax Setting (yd)" 25-infinity
    - Length (in): 16.34, 16.54
    - Weight (oz) 16.93
    - Fog Resistance
    - Nitrogen Gas Purged
    - Shock Resistance: Yes
    - Water Resistance
    - O-Ring Sealed
    - Body Coating: Matte Black Non-Reflective
    - Glass Coating: Green
    - Objective Lens Diameter (mm): 50
The Commander is a long-range optic that offers the precision necessary for extended accuracy. The scope is offered in 10-40 and 8-32 magnification variants to meet the needs of any distance shooter. The Commander can also be ordered with a variety of reticle types. All models are equipped with tri-color illumination, windage, elevation, and parallax adjustments. All models are nitrogen purged for complete water and fog protection.

Item #2: Scope mount For M1A Rifle -

     - Material: Aluminum
     - Color: Anodized Matte Black
     - Imported
     - Fits Mil Spec Springfield M1A Rifles including Scout Squad
     - Does "NOT" fit Springfield M14 or Norinco clone rifles
     - Does "NOT" fit Springfield SOCOM II
     - Two point locking system provides a stable platform for your optics
     - Low profile design with see through channel, allows use of iron sights
     - Provides a Picatinny rail for attaching scopes and optics
     - Will Not fit Socom II
     - Allows for mounting your optics in a low ergonomic position on your rifle
     - Tools requires for installation: Punch, Hammer or Brass Mallet, sharp flat file, thread locking compound ( these tools are Not included )
     - Note that installation of this mount will require fitting procedures as detailed below:
          Installation requires removal the rear stripper clip guide on your rifle by drifting out a pin and then tapping out the guide
          An included replacement part that anchors the rear of the mount will then be filed to fit in place of the stripper clip guide
          The mount can then be attached to the rifle with the include mounting hardware
          Medium strength thread locking compound is required on all the bolts and screws to prevent things from coming loose
     - Includes detailed written installation instructions

CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Brand New With Manufacture Warranty


Add to Cart:

  • Model: SR11L83250BAOE+MT/M14-2
  • Manufactured by: Trinity Force

This product was added to our catalog on Tuesday 25 June, 2013.

Copyright © 2019 m1surplus.com. Powered by Zen Cart