Made in the USA by MAGPUL PRS GEN 3 Precision-Adjustable
Black Color AR Rifle Stock MAG672-BLK
THIS
ITEM QUALIFIES FOR FREE SHIPPING
FEATURES
- Made in the USA by MAGPUL
- Model: PRS GEN 3 Precision-Adjustable
Stock
- Part# MAG672-BLK
- Color: Black
- Weight: 27.8 oz. *
- Weight, w/rifle receiver extension:
31.2 oz. *
- Weight, w/carbine receiver
extension: 31.7 oz. *
- Length, max: 11.5-12.9 in. *
- LOP Adjustment Range: 1.4 in. *
- LOP, M16 Collapsed: ~14.3 in. *
- LOP, M16 Extended: ~15.7 in. *
- Cheek Height Adjustment Range: 0.8 in.
*
* Specifications based on factory
configuration
- The PRS GEN3 is a field precision
stock for AR15 AR10 SR25 platforms, featuring tool-less length
of pull and cheek piece height adjustment
- Mounts to rifle-length receiver
extension tube without A2 spacer but
will also accommodate mil-spec sized M4 Carbine and many A5-length
tubes with standard Castle Nuts and End Plates
-
Receiver extension tube is Not included
- Enhanced strength butt-plate
withstands severe impact and recoil up to .50 BMG
- Rubber butt-pad provides positive
shoulder purchase to prevent slippage and is adjustable for both cant
and height
- Machined aluminum LOP and Cheek Piece
adjustment knobs with positive locking click detents
- Steel adjustment shafts finished with
Melonite® for wear and corrosion resistance
- All aluminum components finished with
MIL-A-8625F, Type III, Class 2 hard anodizing
- Bottom M-LOK slots provide additional
sling mounting possibilities or
for attaching 1913 Picatinny rails for use with a monopod
- Sling Mounts
Front/Rear - rotation limited QD sling swivel mounts (swivels not
included)
Rear -
1.25" aluminum sling loop (left-right reversible)
With solid adjustments for length of pull and cheek piece height via
aluminum detent knobs, the PRS GEN3 (Precision Rifle Stock)
provides a stable interface and is intended for semi-automatic sniper
or varmint type rifles. Offering a nearly universal fit, it is
optimized for rifle-length receiver extensions but will also mount to
many mil-spec carbine and A5-length tubes*. Includes a
cant/height-adjustable rubber butt-pad and rotation-limiting QD sling
swivel cups as well as M-LOK® slots on the bottom for rear monopod
mounting.
**NOTE:
Due to the wide variety of designs and dimensions of carbine receiver
extensions as well as the associated mounting hardware, proper fit
cannot be guaranteed. Mounting to a rifle-length receiver
extension is
recommended to ensure optimal fit and function.
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
No
shipping to California, Connecticut, Delaware, District of Columbia, Guam, Puerto Rico,
Military APO/FPO or any other location where such items are prohibited.
This
item may not be exported outside the USA ( Orders from re-shipping
companies will not be accepted ) Billing and shipping address must not
be located in any of these prohibited locations.
Due
to constantly changing laws pertaining to such items, the shipping
restrictions for this product may be changed at any given time without
notice.
It
is the responsibility of the buyer to research and obey all applicable
local, state, and federal laws in regard to the possession, use, and
sale of any products purchased from M1Surplus.com
This product was added to our catalog on Saturday 11 August, 2018.