Made in the USA by VLTOR E-MOD Mil-Spec Stock Kit For
5.56 and .223 Caliber AR15 Carbine / AEBK-MB
FEATURES
- This is a complete stock kit
- Compatibility: Fits Mil-Spec
AR15/M4 Carbines that are chambered in 5.56/.223 Caliber
- Kit includes:
VLTOR A5H2 buffer
Rifle
spring
Seven position receiver extension
Lock plate and lock nut
VLTOR EMOD stock in black color
- A5H2 buffer
weight: 5.3oz
- The A5 Stock Combo Kit is not
just a stock with M4 components; it was developed as a completely
new operating system
- Specifically developed on the request
of the USMC
- The A5 combo kit is designed to
increase the reliability,
accuracy and performance of at AR platform
- Brings down cyclic rate of AR
carbines
- Lowers bolt carrier velocity
- Improves reliability and
accuracy while reducing felt recoil
- Waterproof side battery compartments
that holds 4 CR123 or three AA batteries in each compartment
- Weatherproof compartment in the
clubfoot area of the stock that hold
two AA batteries
- Comes pre-assembled with rubber
buttpad and strike plate
- Matte (anti-reflection/anti-glare)
finish
- Impact and temperature resistant
polymer, specifically blended for VLTOR stocks
- Has standard military and quick
disconnect swivel socket accessible from both sides
- Slightly wider and longer at the toe
than a regular M4 stock with a noticeable negative pitch making
transitions from the ready position feel more natural
- Seven position Mil-Spec impact
extruded receiver extension specifically used for the A5 system
- Based on the same rugged design as the
original Modstock, with additional features designed from lessons from
the modern battlefield
- The EMOD features a slightly longer
stock and butt pad that increases comb for any given length of pull
when used on scoped rifles
- The buttplate of the EMOD is slightly
wider and longer at the toe than the regular M4 stock with a noticeable
negative pitch, making transitions from the ready feel much more natural
- Extra weight was also added to balance
out the normally muzzle heavy feel of combat carbines
- Includes two removable cheek weld
adapters that also act as waterproof storage compartments that will
hold three AA or four CR123 batteries each and an additional weather
proof compartment is attached to the
clubfoot portion of the stock and will
hold two AA batteries or other small parts
CALIFORNIA
PROPOSITION 65
WARNING: This product can expose you to chemicals including Lead, which
is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.p65warnings.ca.gov
Brand New With Manufacture Warranty
____________________________________
No shipping to Connecticut, Delaware, District of Columbia, Guam, Hawaii, Illinois, Maryland, Massachusetts, New York, Puerto Rico, Military APO/FPO or any other location where such items are prohibited or restricted.
This
item may not be exported outside the USA ( Orders from re-shipping
companies will not be accepted ) Billing and shipping address must not
be located in any of these prohibited locations.
Due
to constantly changing laws pertaining to such items, the shipping
restrictions for this product may be changed at any given time without
notice.
It
is the responsibility of the buyer to research and obey all applicable
local, state, and federal laws in regard to the possession, use, and
sale of any products purchased from M1Surplus.com
This product was added to our catalog on Thursday 05 December, 2013.