10/22 Combo #9 - Mount + Trirail + Red Dot w/ Laser + Taclight

  • Model: CN/KARDLFS+MRUB1022V2
  • 4 Units in Stock
  • Manufactured by: NcStar

 Ask a Question 

$145.99


Max: 2
Add to Cart:
10/22 Combo #9 - Includes Trirail Picatinny Riser Mount + Red Dot Sight With Laser + Tactical Weapon Light and Scope Mount Rail for Ruger 10/22 Rifle THIS ITEM QUALIFIES FOR FREE SHIPPING

Includes the following items:

Item #1: Picatinny Scope Mount Rail

FEATURES
  • Material: Aluminum
  • Color: Matte Black
  • Approx Length: 4.75"
  • Width: 7/8"
  • Fits Ruger 10/22 rifles
This tactical mount provides a mounting rail that will fit most Weaver/Picatinny style scopes and accessories. Provides various cross slots for adjusting your optics. Bolts directly to the factory screw holes on your 10/22 rifle. Easy bolt on installation with includes allen screws. Bolts to the 4 factory screw holes on top of the 10/22 rifle. Includes 4 mounting screwas


Item #2: Tactical Trirail Mount


FEATURES

  • Made by NcStar
  • Color: Black
  • Weight: 7.2 ounces
  • Length: Approx 5 1/4 inches
  • Height: Approx 1 1/4 inches|
Attaches to any weaver base mounting rail on a rifle, carbine or shotgun. Features three weaver type rails for mounting lasers, tactical flashlights, flip up back up sights, scopes and red dots, etc. Top rail measure 5 1/4 inches long. The side rails measure 1 3/4 inches long. Each side rail has 2 weaver type slots for mounting tactical accessories. The side rails can be move around to 3 different positions for ultimate flexibility to accommodate your specific needs


Item #3: NcStar 40mm Red Dot Scope + Laser

FEATURES

  • Made by NcStar
  • Material: Aluminum
  • Color: Matte Black
  • Tube Diameter: 40mm
  • Dot Size: 3 MOA
  • Click adjustable windage/elevation
  • Weight:11.3 ounces
  • Length:4.3 inches
Ruby lens coating reduces glare and improves visual clarity, Built in integral red laser pointer with windage/elevation settings. Turret dial activates red dot scope and laser so they can be used individually or simultaneously, Dial also adjusts brightness setting for red dot scope, Integral mount with quick detach capability can be mounted to most any 7/8" wide Weaver/picatinny style rail system or scope mount


Item #4: LED Tactical Flash Light Set

FEATURES
  • Made by NcStar
  • Color: Matte Black
  • Weight: 5.6 Ounces with ring mount
  • Approx Length: 4 3/4"
  • Material: Durable lightweight aluminum tube
Aluminum mounting rings fits picatinny type rails. New LED technology gives you 50x longer life span than standard flashlight bulbs and 10x more battery life. On/Off activation via push button on end cap ( Push and hold tailcap button for momentary activation / Twist entire tailcap for constant on activation). Uses readily available CR123 lithium batteries. Includes batteries and picatinny ring mount. This entire setup bolts-on with no modification required. Will fit 10/22 rifles that have the 4 factory scope mount screw holes drilled on the top.


CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov



Brand New With Manufacture Warranty
____________________________________

It is the responsibility of the buyer to research and obey all applicable local, state, and federal laws in regard to the possession, use, and sale of any products purchased from M1Surplus.com




This product was added to our catalog on Wednesday 24 August, 2011.

Manufacturers

Your IP Address is: 174.129.59.198
Copyright © 2024 M1Surplus.com - Your One Stop Shop For Hunting And Shooting Accessories. Powered by Zen Cart