Vltor




Product Image Item Name- Price
Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES:     - Made in the USA by VLTOR     - Model: Receiver Extension For Stamped AK Style Rifles     - Manufacture Part# RE-47     - Color: Black     - Fits AK47 MAK90 AK74 type rifles with a stamped receiver     - Does Not fit Slant cut receivers      - Does Not fit SAIGA rifles or shotguns     - Does Not fir milled receivers     - 5 Position receiver extension     - Mil Spec diameter tube     - Accept AR15/M4 type 6 position collapsible stocks with Mil-Spec dimensions     - Watertight storage compartment CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov Brand New With...
$88.99

... more info
Sold Out

Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES:     - Made in the USA by VLTOR     - Model: Receiver Extension For Stamped AK Style Rifles     - Manufacture Part# RE-47     - Color: Black     - Fits AK47 MAK90 AK74 type rifles with a stamped receiver     - Does Not fit Slant cut receivers      - Does Not fit SAIGA rifles or shotguns     - Does Not fir milled receivers     - 5 Position receiver extension     - Mil Spec diameter tube     - Accept AR15/M4 type 6 position collapsible stocks with Mil-Spec dimensions     - Watertight storage compartment CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov Brand New With...
$88.99

... more info
Sold Out

Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

Made in USA - VLTOR AK47 Mak90 Extension Tube fits M4 Stocks

THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES:     - Made in the USA by VLTOR     - Model: Receiver Extension For Stamped AK Style Rifles     - Manufacture Part# RE-47     - Color: Black     - Fits AK47 MAK90 AK74 type rifles with a stamped receiver     - Does Not fit Slant cut receivers      - Does Not fit SAIGA rifles or shotguns     - Does Not fir milled receivers     - 5 Position receiver extension     - Mil Spec diameter tube     - Accept AR15/M4 type 6 position collapsible stocks with Mil-Spec dimensions     - Watertight storage compartment CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov Brand New With...
$88.99

... more info
Sold Out

Vltor AR-15 IMOD Modstock Mil-Spec Battery Storage Butt Pad

Vltor AR-15 IMOD Modstock Mil-Spec Battery Storage Butt Pad

The IMod is offered in the conventional, "Standard" configuration and the unconventional, "Clubfoot" configuration. Even though the Standard model is the most well known model amongst the shooting public, the Clubfoot version is a hybrid model that bridges the gap between tactical and prone shooting positions. In other words, the Clubfoot portion of the stock allows the shooter, with his/her off hand, to support the stock and to control the rear of the weapon, while shooting in prone or rested position. Specifications and Features: Integral, but removable non slip buttpad Rolled/angled buttpad toe with wide traction area Improved lock paddle making it easier to operate Most sharp edges removed that may cause "snag points" to web gear or other vital equipment Improved strength throughout construction of the stock chassis All items are Brand New w/ Full Manufacture Warranty ____________________________________
$89.95

... more info

Vltor AR-15 IMOD Modstock Mil-Spec Battery Storage Butt Pad

Vltor AR-15 IMOD Modstock Mil-Spec Battery Storage Butt Pad

The IMod is offered in the conventional, "Standard" configuration and the unconventional, "Clubfoot" configuration. Even though the Standard model is the most well known model amongst the shooting public, the Clubfoot version is a hybrid model that bridges the gap between tactical and prone shooting positions. In other words, the Clubfoot portion of the stock allows the shooter, with his/her off hand, to support the stock and to control the rear of the weapon, while shooting in prone or rested position. Specifications and Features: Integral, but removable non slip buttpad Rolled/angled buttpad toe with wide traction area Improved lock paddle making it easier to operate Most sharp edges removed that may cause "snag points" to web gear or other vital equipment Improved strength throughout construction of the stock chassis All items are Brand New w/ Full Manufacture Warranty ____________________________________
$89.95

... more info

Vltor AR15 M4 AR308 Enhanced Clubfoot Mod Stock Combo Kit

Vltor AR15 M4 AR308 Enhanced Clubfoot Mod Stock Combo Kit

Made in the USA by Vltor, This kit includes everything you need to install a stock on your rifle. Will fit 5.56mm AR15/M4 and .308 DPMS style AR308 rifles including, P.O.F. KAC SR25, LMT 7.62, LaRue Tactical and LWRC. The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD Combo Kit comes with the regular EMOD Stock, and a Vltor RE-1 Receiver Extension Tube, Carbine Buffer & Spring Set, and Receiver Endplate & Locknut. The EMOD is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making...
$209.95

Add:

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

vltor milspec emod ar15 m4 stock THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES     - Made in the USA by Vltor     - Manufacture Part# AEB-MB ( Black ), AEB-MT ( TAN )     - Model: Mil-Spec E-MOD Stock     - Available in Black and Tan colors     - Fits "MilSpec" AR15/M4 carbine receiver extension tubes The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD is about one inch longer than the original Modstock and with the rubber buttplate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch,...
$102.99

... more info

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

vltor milspec emod ar15 m4 stock THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES     - Made in the USA by Vltor     - Manufacture Part# AEB-MB ( Black ), AEB-MT ( TAN )     - Model: Mil-Spec E-MOD Stock     - Available in Black and Tan colors     - Fits "MilSpec" AR15/M4 carbine receiver extension tubes The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD is about one inch longer than the original Modstock and with the rubber buttplate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch,...
$102.99

... more info

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

vltor milspec emod ar15 m4 stock THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES     - Made in the USA by Vltor     - Manufacture Part# AEB-MB ( Black ), AEB-MT ( TAN )     - Model: Mil-Spec E-MOD Stock     - Available in Black and Tan colors     - Fits "MilSpec" AR15/M4 carbine receiver extension tubes The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD is about one inch longer than the original Modstock and with the rubber buttplate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch,...
$102.99

... more info

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

Vltor Enhanced Clubfoot M4 Mil-Spec E-Mod Stock / Black and Tan

vltor milspec emod ar15 m4 stock THIS ITEM QUALIFIES FOR FREE SHIPPING FEATURES     - Made in the USA by Vltor     - Manufacture Part# AEB-MB ( Black ), AEB-MT ( TAN )     - Model: Mil-Spec E-MOD Stock     - Available in Black and Tan colors     - Fits "MilSpec" AR15/M4 carbine receiver extension tubes The EMOD is based on the same rugged and practical design as the original Vltor Modstock - with specific features designed from lessons taken from the modern battlefield. The EMOD is about one inch longer than the original Modstock and with the rubber buttplate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch,...
$102.99

... more info



Monthly Specials For January









Copyright © 2020 m1surplus.com. Powered by Zen Cart