AK47 Dust Covers

AK47 MAK90 Dust Covers



Product Image Item Name- Price
AK Combo #6 - Trirail Mount + 4x30 Rifle Scope + Red Laser

AK Combo #6 - Trirail Mount + 4x30 Rifle Scope + Red Laser

THIS ITEM QUALIFIES FOR FREE SHIPPING Includes the following items: Item#1: AK47 Trirail Scope / Accessory Mount FEATURES: Material: Steel and aluminum Color: Black Replaces original top receiver cover on rifle. Will fit 7.62x39mm AK-47 / MAK-90 / Saiga type rifle with a standard Military top cover. Stabilizer design includes 2 set screws to ensure no movement of scope mount. Total of 3 Weaver base mounting rails allow for mounting just about any scope, red dot, laser, tac light and other aiming devices. The side rails are each about 1" long and can be mounted on various positions along the sides Installation is usually quick and easy but as with any other AK series rifle, some minor fitting may be required to achieve a good custom fit. Fitting operations are done exclusively to the mount and Not to your rifle. Typical fitting procedures can can be achieved with just a small file. The included trirail mount is a complete replacement for your rifles existing dust cover. This mount...
$99.95

Add:

AK47 Dust Cover Scope Mount for Micro Dot Sight Gen 2

AK47 Dust Cover Scope Mount for Micro Dot Sight Gen 2

FEATURES Made by NcSTAR Material: Aluminum (Rail) and Steel Construction (Dust Cover) Length: 9.5" Weight: 7.3 oz Newest Gen 2 design incorporates a three front tabs and two rear screws to provided a secure fit This is a Top Rail Dust Cover with Picatinny rail amount and Integral rear mount for micro dot reflex sight Replaces existing AK-47 top cover On some rifles minor fitting may be requires on the dust cover mount to achieve a nice tight custom fit Fits Russian spec AKM pattern rifles ( Russian, Chinese, Romanian, Polish, Hungarian, Egyptian ) with a stamped receiver Only fits rifles with the following calibers 7.62X39, 5.54X39, .223 Does Not fit Yugo rifles Does Not fit milled receivers Provides a dedicated Micro Dot mount for installing a Micro Dot directly to your AK with the lowest possible mounting height Provides a Picatinny type rail on top for attaching optics Low Profile Design Does Not Interfere with Rifles Iron Sights Brand New With Manufacture Warranty Against...
$29.95

Add:

I.O. Inc AK47 MAK90 AK74 New Dust Cover

I.O. Inc AK47 MAK90 AK74 New Dust Cover

FEATURES:     - Made by I.O. Inc     - Model: Standard AK Dust Cover     - Manufacture Part#  10122124     - UPC Code: 856867005289     - Color: Black     - Fits AK47 MAK90 AK74 type rifles with a stamped receiver     - Does Not fit SAIGA rifles or shotguns     - Does Not fit milled receivers     - Does Not fit Draco ak pistols     - Patterned after the actual Military AK dust cover CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov Brand New With Manufacture Warranty ____________________________________
$38.99

... more info
Sold Out

Tactical AK47 MAK90 Dust Cover Trirail Scope Mount System / MTAK

Tactical AK47 MAK90 Dust Cover Trirail Scope Mount System / MTAK

FEATURES Made by NcStarMaterial: Steel and aluminumColor: Matte blackWeight: 11.8 ounces Replaces original top receiver cover on rifle. Will fit most AK47, Mak90, Saiga 7.62x39mm rifles with a standard Military top receiver cover. Stabilizer design includes 2 set screws to ensure no movement of scope mount. Total of 3 Weaver base mounting rails allow for mounting just about any scope, red dot, laser, tac- light and other accessories. The side rails are each about 1" long and can be positioned on various positions along the sides. This item has just been redesigned to allow for a wider channel so the iron sights on your rifle can still be used when this mount is installed. All items are Brand New w/ Full Manufacture Warranty ____________________________________
$29.95

Add:

VISM AK47 MAK90 Dust Cover KEYMOD Scope Mount

VISM AK47 MAK90 Dust Cover KEYMOD Scope Mount

Dust Cover KEYMOD Scope And Accessory Mount FEATURES     - Made by VISM     - Manufacture Part# VMTAKKM     - Model: Dust Cover KEYMOD Scope And Accessory Mount     - Material: Aluminum (Rail) and Steel Construction (Receiver Cover)     - Color: Black     - This KeyMod Compatible Top Cover Mount allows for attaching scopes and accessories to your AK rifle     - Replaces existing AK-47 receiver cover     - Fits AKM pattern rifles with a stamped sheet metal receiver (7.62X39, 5.54X39, .223)     - Provides a low profile KeyMod mounting surface on three sides of the Receiver Cover     - Ideal solution for mounting an optic mount and accessories to the top or sides of the receiver cover on your AKM pattern rifle.     - The top KeyMod surface is pre-drilled for mounting an NcSTAR Micro Dot directly to the top of your AK...
$32.99

Add:



Copyright © 2020 m1surplus.com. Powered by Zen Cart